Extended modules > Creo Elements/Direct Cabling > Libraries > Move, delete, and rearrange fixtures
  
Move, delete, and rearrange fixtures
You can move fixtures, such as cable clamps, while maintaining cables routed through them. You can also delete fixtures, and rearrange cables' positions within clamps.
To learn more, explore the tutorial on this subject.
To move a fixture,
1. Click Interface and then, in the Library group, click the arrow next to Fixture.
2. Click Move fixture. The Re-Position Fixture dialog box opens.
3. Select the fixture.
4. Click Reposition and use the Position tools to reposition the fixture.
5. Click to complete the operation. You may wish to recreate solid cables.
* 
Fixtures do not automatically adjust to the size of cables inside them.
To delete a fixture,
1. Click Interface and then, in the Library group, click the arrow next to Fixture.
2. Click Delete fixture. The Delete Fixture dialog box opens.
3. Select the fixture.
4. Click to complete the operation.
To rearrange the position of cables within a clamp,
1. Click Interface and then, in the Library group, click the arrow next to Fixture.
2. Click Re-Arrange.
3. Click a clamp. A new viewport opens with circles and a construction geometry cross hairs, which represent the center of the clamp.
4. Click Rearrange.
5. Click Circle in the dialog box and select one of the 2D circles. The 2D Circle moves with the cursor. Click to place it.
6. Click Circle again and rearrange the position of the other cables in the clamp.
7. Click to complete the operation.