Extended modules > Creo Elements/Direct Part Library > Drilled holes > Change drilled hole settings
  
Change drilled hole settings
These settings affect the drilled hole dialogs and how holes are created.
To change drilled hole settings,
1. Click Part Library and then, in the Drills group, click the arrow next to More.
2. Click Settings. The Default Drill Settings dialog box opens.
3. Change the following settings:
Define Feature: If set to On, a user-defined feature is created for each hole.
ThroughPart: If set to On, the Through Part option is selected by default.
Included angle: The angle of the cone at the end of a blind hole or a threaded blind hole, or the point angle of the drill bit. For steel drill bits, this angle is 118 degrees. For other materials, you may need to change the angle.
4. Click OK to complete the operation.