Extended modules > Creo Elements/Direct Mold Base > Standard components > Component library > Locating ring
  
Locating ring
Create a locating ring and locating ring hole(s) through the relevant plates according to the "Oversize" values.
Parameters
D1
Locating ring external diameter.
D2
Locating ring diameter on plate side.
S2
Mold plate recess.
D6
Inner cone diameter.
a
Inner hole cone angle.
D4
Inner hole diameter.
S4
Inner diameter rim size.
D5
Hole diameter of Spru shoulder.
S3
Depth of Spru shoulder.
c
Outer chamfer angle.
S5
Outer chamfer height.