Creo Elements/Direct Cabling Tutorial 4: Step 2 of 4
Connect wires to terminals
Connect the green ground wires to the two ground terminals first.
To connect wires to terminals,
1. Click
Cabling and then, in the
Modify group, click
Move End Pt. The
Move Cable End Point dialog box opens.
2. Click End Point and select the lower green wire near its end:
3. Select Terminal in the Destination Point section.
4. Click Terminal and select the upper ground terminal:
5. Click Next.
6. Repeat steps 3-6 to connect the following wires:
◦ Connect the green wire from the other cable to the second ground terminal.
◦ Connect the lower cable's white wire to the gold screw terminal.
◦ Connect the lower cable's black wire to the grey screw terminal.
◦ Click
OK to complete the operation.
Note that the wires bend toward the terminals and come straight out of the terminals automatically: