Extended modules > Creo Elements/Direct Cabling > Flatcables > Modify the bend radius of a cable
  
Modify the bend radius of a cable
You can modify the bend radius of a cable, keeping one edge of the cable fixed.
To modify the bend radius,
1. Click Cabling and then, in the Flatcable group, click the arrow next to Modify.
2. Click Modify flatcable. The Modify Flatcable dialog box opens.
3. Click Pnt on Edge and select the bend for which you wish to change the radius.
4. To keep an adjacent edge fixed in its current position, click Keep Fixed in the Select Fix Side section and select the adjacent edge.
5. Click Radius in the Change Radius section and type a value. Click Change Rad to change the radius of the selected bend to the specified value.
6. Click Angle in the Change Angle section and type a value. Click Rotate + or Rotate - to rotate the bend in the clockwise or anticlockwise directions by the specified angle.
7. To delete the bend, click Delete in the Delete Round section.
8. To flip the bend direction, click Flip in the Flip to other side section.
9. Click to complete the operation.