Load rules
A load rule allows you to specify the versions of models and assemblies to load into Creo Elements/Direct Drafting.
The following load rules are shipped with Creo Elements/Direct Drawing Manager:
• As Stored - selects the configuration of the model as it was saved into the Creo Elements/Direct Manager Server database.
• Highest Revisions - selects the highest revision of every object within the model.
• Highest Released Revisions - selects the highest revision that has been released of every object within the model.
In the following example,
|
Time 1
|
Time 2
|
Time 3
|
Time 4
|
Time 5
|
|||
|---|---|---|---|---|---|---|---|
 |
Toolkit
|
A.0
|
A.0
|
B.0 (R)
|
B.1
|
B.1
|
|
 |
Hammer
|
A.0
|
A.1
|
B.0 (R)
|
B.0
|
B.0
|
|
|
Pliers
|
A.0
|
A.1
|
B.0 (R)
|
B.0
|
B.0
|
|
|
Screwdriver set
|
A.0
|
A.0
|
||||
| Pozi |
A.0
|
A.1
|
|||||
| Phillips |
A.0
|
A.0
|
• As Stored for Toolkit (B.1): Toolkit (B.1), Hammer (B.0), Pliers (B.0), Screwdriver set (A.0), Pozi (A.0), Phillips (A.0).
• Highest Revisions: Toolkit (B.1), Hammer (B.0), Pliers (B.0), Screwdriver set (A.0), Pozi (A.1), Phillips (A.0).
• Highest Released Revisions: Toolkit (B.0), Hammer (B.0), Pliers (B.0)
Load rules may be added by customizing the Creo Elements/Direct Drawing Manager code. For example, some organizations add a load rule to select the highest revisions of objects in the Work state. See the Customization Guide for information on creating custom load rules.