Interfaccia utente classica > Guida dell'utente di Creo Elements/Direct Drafting: interfaccia utente classica > Preparing the Drawing Environment > Loading a Drawing Frame
Loading a Drawing Frame
With the LOAD FRAME command, load a standard size plotting frame into your drawing. The frame can then be used to aid positioning of the various views in your drawing.
The frame is a symbol part which is always loaded below the Top part in level 1 (refer to Handling Parts and Assemblies). Each frame consists of two concentric rectangles: the outer one the size of the respective paper size, the inner one between 10 to 50 mm smaller per side.
The frames are drawn in magenta with the dotted linetype and therefore will not normally be plotted out.
Drawing frame part names have the form: frame_A4[symbol], frame_A3[symbol] , and so on.
The ten frame options are:
A
A4
B
A3
C
A2
D
A1
E
A0
To load a drawing frame into your drawing:
1. Press SETUP 1.
2. Pick the paper size in LOAD FRAME.
3. Indicate the location or enter ABSOLUTE.
È stato utile?