Defining Key Commands
To define a custom key command:
1. Pull down the Setup menu and click Keys.
2. In the Key Definitions dialog box, click a key (such as [1]).
3. Specify any or all of the following commands:
|
Plain
|
Enter the command to be executed when the key is pressed.
|
|
Control
|
Enter the command to be executed when the key is pressed in combination with the [Ctrl] key.
|
|
Alt
|
Enter the command to be executed when the key is pressed in combination with the [Alt] key.
|
|
Alt-Control
|
Enter the command to be executed when the key is pressed in combination with the [Alt]+[Ctrl] keys.
|
4. Check the Execute box if you want the command to execute when the associated key (or key combination) is pressed.
If you leave this box unchecked, the command will simply be written to the User Input Line in Creo Elements/Direct 2D Access when you press the key (or key combination). To execute the command, press [Enter].
 |
Note that some keys (such as F1) are disabled because they serve a predefined function in the Windows environment.
|