Horizontal Move/Copy
To move or copy a drawing element(s) to a new position in the horizontal direction:
1. Click Move in Modify.
2. Click Horizontal in Move.
3. Select the element(s) to be moved.
4. Enter the required horizontal distance. Alternatively, specify a reference point and then a destination point to define the horizontal distance.
If a repeat factor has been specified, the same horizontal distance will be taken for each move or copy.
 |
You can interrupt the command with the Measure Length or Measure Distance function if the distance you need can be measured from existing features on the drawing. Alternatively, you can specify two points defining the horizontal distance required.
|