Interfaz de usuario clásica > Manual del usuario de Creo Elements/Direct Drafting: interfaz del usuario clásica > Getting Started with Creo Elements/Direct Drafting > The Creo Elements/Direct Drafting User Interface > Using the Dynamic Mouse
Using the Dynamic Mouse
To use the dynamic mouse, press and hold the [Ctrl] key and press one of the following mouse buttons:
Left Button
Panning horizontally and vertically.
Right Button
Zooming:
Towards the screen: zooms in
• Away from the screen: zooms out
Middle Button
Not assigned
• The full functionality is available on a three-button mouse. If a two-button mouse is used, press the left and right button simultaneously to emulate the middle button.
• This functionality is available on screen-only versions of Creo Elements/Direct Drafting.
• Whenever the user definable buttons are pressed, the corresponding string value for that button is displayed on the user input line.
• If your drawing contains images (pixmaps), you can hide these using the SHOW Box command before doing any dynamic operations. This improves system performance.
¿Fue esto útil?