Klassische Benutzeroberfläche > Kontrolle mit Creo Elements/Direct 2D Access für die klassische Benutzeroberfläche > Plotting Drawings and Dumping Screens > Starting a Plot
Starting a Plot
Use the START PLOT command to send your drawing to one of the available spoolers. The spooler queues the drawing and then sends it to a plotter.
To initiate a plot:
1. Pick PLOT to display the PLOT screen menu
2. Pick CONFIG
3. Pick a plot configuration from the table of predefined plot configurations. Refer to Selecting a Predefined Plot Configuration. If you wish to define your own configuration refer to Selecting the Plotter Type and Naming the Plot Destination.
4. Pick MENU 1.
The current plot configuration is displayed in the menu field to the right of the START PLOT command.
5. Set up the desired plot parameters: POSITION, SCALE, ROTATE ANG, and SIZE. (Refer to the appropriate sections in this chapter).
6. Pick START PLOT
Creo Elements/Direct 2D Access sends the drawing to the spooler, which then queues your plot request and sends your plot data to a plotter.
War dies hilfreich?