Starting a Plot

Starting a Plot

Use the START PLOT command to send your drawing to one of the available spoolers. The spooler queues the drawing and then sends it to a plotter.

To initiate a plot:

1. Press PLOT.

2. Pick CONFIG.

3. Pick a plot configuration from the table of predefined plot configurations. Refer to Plot Config Menu. If you wish to define your own configuration, refer to Selecting the Plotter/Printer Type and Naming the Plot Destination.

4. Pick MENU 1.

The current plot configuration is displayed in the menu field to the right of the START PLOT command.

5. Set the plot parameter POSITION, SCALE, OUTPUT, CONTENTS ROTATE ANG, LTYPE LEN and PAPER SIZE (refer to the appropriate sections in this chapter).

6. Pick START PLOT.

Creo Elements/Direct Drafting sends the drawing to the spooler, which then queues your plot request and sends your plot data to a plotter.

这对您有帮助吗?