Setting Text Attributes

经典用户界面 > Creo Elements/Direct Drafting 用户指南：经典用户界面 > Dimensioning a Drawing > Setting Text Attributes

SET TEXTS gives you access to the commands that set attributes of dimension text. These settings apply to all subsequently applied dimensioning. The commands available under SET TEXTS are:

SET TEXT	Sets text appearance attributes such as size, font, slant, and aspect ratio.
SET FORMAT	Sets the format for values in dimensions.
SET UNITS	Sets the units used for the upper and/or lower dimensioning text.
SET FRAME	Determines what kind, if any, box is drawn around subsequent dimensioning text.
SET DIMLOC	Sets the location of the dimension text relative to the dimension line.
SET ORIENT	Sets the orientation of dimension text relative to the dimension line.
SET OFFSET	Sets the offset distance between dimensioning text and the dimension line.
SET SPACE	Sets the distance between the ends of the dimension line and the dimension text.
SET CATCH	Sets the size of the catch range used to automatically center dimensioning text between extension lines.

Dimension text is comprised of several components:

• Prefix

• Dimension value

• Tolerance

• Postfix

To set the dimension text appearance:

1. Pick SET TEXTS from the DIMENSION 3 screen menu.

2. Pick SET TEXT.

3. Pick a text component to set. By default all components are affected.

4. Pick the attributes in the OPTIONS list.

Creo Elements/Direct Drafting uses these settings for all subsequent dimensions.

The SET TEXT components are:

• All (prefix, value, tolerance and postfix)

• Lower

• Upper

• Lower Val

• Upper Val

• Lower Tol

• Upper Tol

• Prefix

• Postfix

这对您有帮助吗?