1. Convert splines to lines and arcs before you translate the MI file.

2. Make sure the files to be translated and the VRML Translator are on the same system.

3. During translation, several minor warnings may appear. You can suppress these warnings with the TRANSLATOR_WARNING function. See TRANSLATOR_WARNING in the Programming Reference Guide for details.

4. Make sure the parameters in the appropriate configuration file are set correctly for your translation. Refer to Configuration File for information on setting the parameters. If you need to edit a file, use an editor that saves files in ASCII format.

5. To translate in batch mode, you must first create the required batch file. Refer to Creating a Batch File for guidance.