Generate a Variation
The part is now fully constrained. To generate the first variation:
1. In the Generate Constraints dialog box, click the Assign radio button. Then pull down the Type selection list and select Dimension.
2. Click Apply.
3. Click the dimension for the radius of the large hole (currently 373.32).
Type in: 250 [Enter]
4. Click the dimension for the width of the slot (currently 28.48).
Type in: 20.75 [Enter]
5. Click the dimension for length of the slot (currently 31.41).
Type in: 58 [Enter]
6. Click End.
7. Click Preview in Solve. The magenta outline shows how the variation will be drawn without changing the part. Alternatively, you can replace the master part with the new geometry by selecting No Keep.
8. Click End to remove the preview, or Undo if you solved with No Keep.
Repeat this procedure several times, substituting new values of your choosing.
Demopart02 Variation
