Fluent User Interface > Creo Elements/Direct Drafting User's Guide: Fluent User Interface > Adding Symbols to a Drawing > Surface Symbols > Illustrated Examples of Surface Symbols > Symbol ((C))
Symbol ((C))
1. Click :
* 
When you select a different symbol type, the existing settings are preserved in the Compose Menu. Therefore, any settings for a different symbol type require explicit changes. To leave any symbol element blank, you either specify a space character (in apostrophes) or you can click EMPTY.
2. Under Compose Menu, click d.
The Lay Direction box opens.
3. Select EMPTY.
4. Under Compose Menu, click a2.
5. Type ‘Ra 100’ in the user input line and press ENTER.
6. Under Compose Menu, click b.
The Manuf Process Surface Treat box opens.
7. Select grinded.
8. Under Compose Menu, click e.
The Manuf Allowance box opens.
9. Select 3.
10. Under Compose Menu, click f1.
11. Select Rz 25.
12. Position the symbol at a suitable point to the left of and below the area to marked for grinding.
13. To select the start point of the reference line, click a point to the left of the symbol foot point.
14. To select the flexion point of the reference line, click a point close to a line which is perpendicular to the area to be marked for grinding.
15. To select the start point of the reference line arrow, click a point on the area to be marked for grinding.
16. Click Confirm.
Was this helpful?