Standard Hatch Patterns
This section describes how to set up standard hatch patterns which are used by all subsequent 
Hatch buttons in the Annotate group on the Drafting tab.
Hatch buttons in the Annotate group on the Drafting tab.To set up a standard hatch pattern:
1. Click > > 
Hatch.
Hatch.The Hatch Settings dialog box opens.
2. Click Standard to enable the Standard area for editing.
3. Click the required standard hatch pattern from the following:
◦ Iron
◦ Steel
◦ Copper
The selected standard hatch pattern becomes active.
The three standard options are displayed below along with the values of Offset, Distance, Angle, Color, and Linetype used (refer to Setting Hatch Patterns). All the examples shown are drawn with the following hatch parameters:
• Hatch Angle: 45
• Hatch Distance: 5
• Match Point: 0,0