Specifying Linear Offsets
To specify linear offsets for Center and Left:
1. Click > 
Print > 
Print Setup.
Print > Print Setup.The Print dialog box opens.
Alternatively, press CTRL+P to open the Print dialog box.
2. Click the Drawing tab and then, in the Position area, type an offset in the X direction and in the Y direction in the X Offset box and Y Offset box, respectively, for Center and Left. The print or plot output is moved accordingly in the X direction and/or Y direction.
These offsets are interpreted in terms of the current length unit (such as mm) set up for your Creo Elements/Direct 2D Access environment.