Client Use of Publishing Configuration
A Arbortext Editor client retrieves the Publishing Configuration document from the Serveur Arbortext PE each time it enables publishing against an Serveur Arbortext PE. under the following circumstances:
• when Arbortext Editor starts and Arbortext Publishing Engine publishing was enabled during its last session
• When the Use Publishing Engine preference is changed from cleared to checked and the URL preference value is set to a valid URL of an Serveur Arbortext PE ( > > )
• When the URL preference value is changed to a valid URL of a different Serveur Arbortext PE while the Use Publishing Engine box is checked (also in > > )
• when the set command option peservices is changed to on and peserverurl is set to a valid URL of an Serveur Arbortext PE
• when the set command option peserverurl changes to the valid URL of a different Serveur Arbortext PE while the set option peservices is set to on
A good way to force Arbortext Editor to again retrieve the Publishing Configuration document from the Serveur Arbortext PE is to clear the Use Publishing Engine check box and then reopen > and check the box.
You can display the Arbortext Editor version of the Publishing Configuration document by selecting > > . Either the Publishing Configuration document will be displayed, or an error dialog box will appear explaining why Arbortext Editor is unable to communicate with the Serveur Arbortext PE.
Parent topic