Opening Interferences in Creo View
You can select one or more interferences from one of the tables that host interferences, and open them in Creo View.
• Related Interferences
• Interference Detection Report Contents
• Assigned Interferences
• Interference Detection Report Comparison
Open the interferences in Creo View in one of the following ways
• Select one or more interferences, right-click and select Open in Creo View.
• Select one or more interferences, and then select Open in Creo View on the toolbar.
• Select one or more interferences, and then select > .
The Interference Report opens into Creo View. The interferences that you selected are preselected in the Interference Detection pane of the lower data panel.
|
• All selected interferences must reside in the same interference report.
|
When opening Creo View from Interference Detection Report Comparison table.
• If you select interferences that exist in both reports, Creo View opens the interferences in the context of Interference Detection Report 2 of the comparison.
• If you select interferences that exist only in one report, Creo View opens to that report.
• If you select interferences of which some are present in both reports, and some in either the first or the second report, Creo View opens to the common report.
See “To Edit Windchill Batch Interference Attributes in the Creo View Client” in the Creo View Help Center for information on how to examine interferences in Creo View.