DA_SETTINGS_LOAD modifies the display characteristics of load symbols in a session.
-->(DA_SETTINGS_LOAD)---------+
|
+------------------------+
|
+--------+--+--(:VERTEXFORCE)--------------------------+-->
| | |
| +--(:EDGEFORCE)----------------------------+
| | |
| +--(:FACEFORCE)----------------------------+
| | |
| +--(:FACEPRESSURE)-------------------------+
| | |
| +--(:SCALEMETHOD)--+--(:FIXED)---+---------+
^ | | | |
| | +--(:SCALED)--+ |
| | |
| +--(:VALUE_FIXED)----|length|--------------+
| | |
| +--(:VALUE_SCALED)---|number|--------------+
| | |
| +--(:COLORSYMBOL)----|GET_RGB_COLOR|-------+
| |
+------------<---------<-----------<----------+
The following options are available to global settings for loads on a part.
-
:VERTEXFORCE
- selects the symbol for an applied static load on a vertex.
-
:EDGEFORCE
- selects the symbol for an applied static load on an edge.
-
:FACEFORCE
- selects the symbol for an applied static load on a face.
-
:FACEPRESSURE
- selects the symbol for a distributed pressure load on a face.
-
:SCALEMETHOD
- allows specification of the method used to change symbol sizes.
-
:FIXED
- selects fixed as the symbol scaling method.
-
:SCALED
- selects scaled as the symbol scaling method.
-
:VALUE_FIXED
- sets a specific value for fixed symbol scaling.
-
:VALUE_SCALED
- specifies the multiplier used to scale symbols according to the values of the forces they represent.
-
:COLORSYMBOL
- enables color selection for the selected symbols.
Use this action when modifying the display of study information in Design Integrity.
DA_SETTINGS_SYMBOL_SIZE terminate action,
DA_SETTINGS_CONSTRAINT terminate action,
DA_SETTINGS_DISPLACEMENT terminate action,
DA_SETTINGS_MESH_CONSTRAINT terminate action,
DA_UNIT_SYSTEMS terminate action,
DA_BASIC_UNITS terminate action,
DA_MECH_DERIVED_UNITS terminate action