* Press New under Solid Pipe.
* Press Owner button and select an assembly from the browser, the Cooling Cycle sub-assembly will be created and in it the solid pipes. Defaults to the mold assembly.
Adding the solid pipe is the same as adding the hole pipe, face, position, diameter etc.
From pipe (This function is enabled only if a mold exists.)
* Press FromPipe under Solid Pipe.
* Key-in name for the solid pipe, if not defined default names (solid_pipe_1, solid_pipe_2 etc.) will be created.
* Press the Pipe button and select pipe hole from the screen.
The owner name shows up when the user picks a pipe, it's the first common owner of the pipe that the user selected. Defaults to the mold assembly .
* Check the Cycle check box if you want to create solid pipes for all pipes in the cycle.
* Click
Remove
* Press Remove under Solid Pipe.
* Select from screen or from the browser the solid pipes you want to remove.
* Check the Cycle check box if you want to remove all the solids in the cycle.
* Click