CoCreate OneSpace Designer - Commands Reference Manual

DA_MODIFY_FIXED_TEMP_EDGE modifies the fixed temperature value on an edge.

Syntax

-->DA_MODIFY_FIXED_TEMP_EDGE--+
                              |
+-----------------------------+
|
+---+--+--(:LBC)-------|SELECT S_FERRUM_FIXED_TEMP|--(*1*)--+-->
    |  |                                                    |
    |  +--(:STUDY)-----|SELECT S_FERRUM_STUDY|--------------+
    |  |                                                    |
    |  +--(:NAME)------|string|-----------------------------+
    |  |                                                    |
    |  +--(:REF-ELEM)--|edge|-------------------------------+
    ^  |                                                    |
    |  +--(:VALUE)-----|temperature|------------------------+
    |                                                       |
    +-------<----------<----------<---------<-----------<---+

Options

• :LBC - specifies the LBC associated with the fixed temperature.
• :STUDY - specifies the name of the associated study for the fixed temperature.
• :NAME - specifies the name of the fixed temperature to modify.
• :REF-ELEM - specifies the part element with the fixed temperature to modify.
• :VALUE - specifies the temperature value.

When to use