AM_CREATE_SYMBOL_SURFACE creates surface symbols.
----->(AM_CREATE_SYMBOL_SURFACE)----(:GO :OK)--->--+
|
|
+----------------------<-----------------------+
|
| +---------------------<-------------------------+
| | |
| | |
+---->----+(*)-(:OWNER)--|AM_GEO_SET_DOMAIN|--(:GO :OK)---+----->
| |
+(**)-(:REFLINE)---|AM_CREATE_REFLINE_IR|-------+
| |
+---(:FORM)----|1..6|---------------------------+
| |
+---(:A1)------|string|-------------------------+
| |
+---(:A2)------|string|-------------------------+
| |
+---(:B)-------|string|-------------------------+
| |
+---(:C)-------|string|-------------------------+
| |
+---(:F)-------|string|-------------------------+
| |
+---(:E)-------|string|-------------------------+
| |
+---(:D)-------|"",=,|,X,M,C,R,P|---------------+
(*) necessary when the default owner is not set
(**) only available when :OWNER is a view or a sketch
- :GO :OK is necessary for setting the owner of the symbol.
- :OWNER specifies the owner of the symbol using the AM_GEO_SET_DOMAIN subaction.
- :REFLINE specifies a reference line to lead from the last-placed
symbol to a target element in the drawing using the AM_CREATE_REFLINE_IR
subaction.
- :FORM specifies the base shape of the surface symbol.
- :A1 specifies the upper roughness value.
- :A2 specifies the lower roughness value.
- :B specifies the manufacturing process.
- :C specifies the covered length.
- :F specifies another roughness measure.
- :E specifies the machining allowance.
- :D specifies the groove direction.
Use this action to create a surface symbol on a drawing.
AM_GEO_SET_DOMAIN interrupt action,
AM_CREATE_REFLINE_IR interrupt action
![[Contents]](toc.gif)
![[Index]](index.gif)
![[Books]](books.gif)