Editing Recipes for Using Creo View MCAD Adapters > Performing Recipe Editor Tasks > Optimizing the Viewable Size and Load Time for Large Assemblies
  
Optimizing the Viewable Size and Load Time for Large Assemblies
You can optimize the viewable size and related load time for large assemblies while maintaining rendering quality. The viewable size of 3D models can be minimized by restricting the viewable output to pure tessellation of the B-REP solid definition. This is useful only in the view and markup of the B-REP definition. It is not intended for accurate measurements or analysis. Use the following recipe options for optimizing the viewable size and load time:
adapter/outputMassProps=0
adapter/outputDatumQuilt=0
adapter/outputDatumPlane=0
adapter/outputDatumCurve=0
adapter/outputDatumPoint=0
adapter/outputDatumAxis=0
adapter/outputDatumCsys=0
adapter/outputAnnotFloat=0
adapter/outputAnnotPlanar=0
adapter/outputAnnotScreen=0
adapter/outputAnalytical=0
adapter/prep=Single_Body
adapter/lod=Single_Body
lod/Single_Body/lodNo=1
lod/Single_Body/maxLPF=1
lod/Single_Body/bbox=0
lod/Single_Body/noth=0
lod/Single_Body/lodLocn0=0
prep/Single_Body/weld=0
prep/Single_Body/flip=0
prep/Single_Body/rsmt=0
In addition, you can turn off the hidden layer publishing.