Installing the Adapters > Installing the Creo View MCAD Adapters on Windows
  
Installing the Creo View MCAD Adapters on Windows
Install the adapters from the Creo View Adapters media.
1. Load the installation media. The InstallAnywhere dialog box opens. If it does not start automatically, then run setup.vbs from the installation media.
2. Select a language and click OK. The Creo View — Adapters installer dialog box opens to the Before You Begin page.
3. Read the information, and then click Next. The PTC Customer Agreement page opens.
4. Read the Terms and Conditions and select I accept.
5. Click Next. The Select Product Options page opens.
6. Select the adapters to install.
The adapters listed under Install Batch Import Adapters, are generic data exchange formats that can be converted on any machine. You do not need a CAD tool installed or licensed.
The Adapters for specific CAD tools requires the CAD software to be installed and licensed on the machine that will be used for publishing.
7. Click Next. The Select Directory page opens.
8. Under Installation Directory, accept the default directory or browse to a new path, and then click Select.
9. Click Next. The Select Worker Daemon Options page opens.
10. If you are configuring the adapters for server-controlled publishing, and you are installing the adapter on a machine other than the Windchill server:
a. Select Configure Worker Daemon as a Windows Service.
b. Accept the default port of 601 or type your Port Number in the box.
c. Click Next.
11. Review the settings and the disk availability, and then click Install. The adapters are installed.
12. Click Done to exit the installer.
The adapters you selected are now installed:
To configure multiple server-controlled processes on a single machine, continue to the next section, Configuring Multiple Non-File Synchronization Workers on a Single Machine.
To edit the default recipe settings, continue to the next chapter, Introduction to Recipe Editing for Converting CAD Data.
To get started with publishing files, continue to the chapter specific to your adapter.