Configuring the Creo View Adapter for NX to Generate Drawing Viewables in PDF Format
By default, the Creo View Adapter for NX generates drawing viewables in CGM format.
To generate drawing viewables in PDF follow these steps:
1. Install the NXPLOT module for the NX application. This is required for the > > .
2. In the Recipe Editor click > and then select PDF in the Drawing Output box.
|
|
• If you do not install the NXPLOT module, an error message appears and the PDF is not generated. Refer to TAN 149895.
• If you publish drawing in minimum memory mode using batch publish to PDF, some contents may go missing and an error message appears. If so, Refer to TAN CS41248.
|
