Prerequisites for the Creo View Adapter for SolidWorks
Check the following items to ensure that your system is able to run the Creo View Adapter for SolidWorks:
• The Creo View Adapter for SolidWorks must be supported on the operating system, SolidWorks version, and meet the minimum requirements as shown in the Software Matrices available at:
• Prior to configuring the Creo View Adapter for SolidWorks, validate that SolidWorks Standard, SolidWorks Professional, or SolidWorks Premium is correctly configured and licensed; otherwise, the adapter will not work.
• To ensure all SolidWorks subassembly geometry for large assemblies is loaded and published, set the following SolidWorks configuration options for user accounts that start the SolidWorks worker processes:
◦ Under Tools > Options > Performance > Assemblies, clear Automatically load components lightweight.
◦ Under Tools > Options > Performance > Assemblies, select Always resolve sub-assemblies.
◦ Under Tools > Options > Assemblies, clear Use Large Assembly Mode.
• Ensure that your operating system has adequate CPU and storage systems.
• The adapter operates under a user account that must be configured to run SolidWorks.
|
|
• When configured as a service using the Worker Daemon, the service’s Log On As account must also be configured to run SolidWorks.
• Running multiple Adapter for SolidWorks sessions on the same machine simultaneously is not supported.
• If you attempt to load CAD data into SolidWorks and have problems, those same problems will prevent the adapter from converting this data to the Creo View format.
• Do not use network drive installations of SolidWorks for workers.
|
