|
Inventor Output Options
|
Values
|
Description
|
|
filetype
|
Binary*
ASCII
|
Sets the output format of the STL file.
|
|
ExportUnits
|
Inch
Foot
Centimeter*
Millimeter
Meter
Micron
|
Specifies exported file unit type.
|
|
Assembly
Configuration
|
SingleFile*
|
Creates only single file even for assemblies.
|
|
MultipleFiles
|
Creates multiple number of files in case of assemblies.
|
|
|
Resolution
|
High
Medium*
Low
Custom
|
Specifies resolution of the output file.
|
|
SurfaceDeviation
|
<Integer Value>
Range is from 1 to 100.
Default is 60.
|
Valid only when Resolution is set to Custom.
|
|
NormalDeviation
|
<Integer Value>
Range is from 1 to 40.
Default is 14.
|
Valid only when Resolution is set to Custom.
Any input value out of this range is set to 14.
The value shows (InputValue/40)*100% in the UI, so to set 50% in NormalDeviation, set the value to 20.
|
|
MaxEdgeLength
|
<Integer Value>
Range is 1 to 100.
Default is 100.
|
Valid only when Resolution is set to Custom.
|
|
AspectRatio
|
<Integer Value>
Range is 1 to 40.
Default is 40.
|
Valid only when Resolution is set to Custom.
Any input value out of this range is set to 14.
The value shows (InputValue/40)*100% in the UI, so to set 50% in AspectRatio, set the value to 20.
|
|
AllowMoveMeshNode
|
Yes
No*
|
When set to Yes, allows move mesh node.
|
|
ExportColor
|
Yes*
No
|
When set to Yes, allows color export.
|