|
Model UID
|
The anonym model ID.
|
|
Model type
|
Type of model which was analyzed. For example, part or assembly.
|
|
Bodies count
|
Count of bodies in this model.
|
|
Body usage type
|
Type of bodies in this model. For example,
• No Bodies
• Final Single—the default from Creo 7.0
• True Single—there is one real body but not the default
• Multibody
|
|
Num diff mass props
|
Number of bodies with mass properties other than the default.
|
|
Num body types
|
Count of supported bodies type.
|
|
Body type
|
Types of bodies in the model. For example, Construction Body, Active Body, or SheetmetalBody
|
|
Num hybrid body types
|
Count of supported hybrid body types.
|
|
Hybrid body type
|
Types of bodies in this model. For example, Lattice Hybrid Body or Generated Hybrid Body.
|
|
Model UID
|
The anonym model id
|
|
Model type
|
Type of model. For example, part or assembly.
|
|
Study type
|
Type of study. Currently only structural study is available
|
|
Number of keep in
|
Number of preserved geometry per study.
|
|
Number of keep out
|
Number of excluded geometry per study.
|
|
Number of contact
|
Number of contacts per study.
|
|
Number of load case
|
Number of load cases per study.
|
|
Number of design criteria
|
Number of design criteria per study.
|
|
Loads information
|
Number of defined loads. Each load case has multiple types of loads and each load type has multiple loads defined.
|
|
Constraints information
|
Number of defined constraints. Each load case has multiple types of constraints and each constraint type has multiple constraints defined.
|
|
Design objective information
|
List of all objectives per design criteria. The list includes objective type, value, and unit.
|
|
Design constraint information
|
List of all constraints per design criteria. The list includes constraint type, value, and unit.
|