To Set Default or Active View Model-Interference Options
1. Click > . The Creo View Options dialog box opens.
2. On the left, under General, click Interference. The Model-Interference options open.
3. To calculate the interference volumes and enable the production of a full report in
Approximate mode, ensure that
Calculate interference volumes when running in approximate mode is checked (default state).
4. To set the Calculation Mode with which to open the Interference Detection Settings dialog box, set Showing to Defaults, and then select Interference. The Model-Interference options open
5. Under Calculation Mode, select Accurate or Approximate.
6. Click Apply to apply the options and keep the Creo View Options dialog box open, or click OK to apply the options and close the dialog box.