To Display Model Geometry
1. Click > . The Creo View Options dialog box opens.
2. Next to Showing, select Illustration or Current Figure.
3. On the left select > . The Model-Filters options open.
4. To enable or disable display options, select or clear the check boxes below:
◦ For Model Geometry:
▪ Solids
▪ Surfaces
▪ Cosmetics
◦ For Model Construction Geometry:
▪ Surfaces
▪ Cosmetics
▪ Datum Planes
▪ Datum Curves
▪ Datum Axes
▪ Datum Points
▪ Coordinate Systems
5. Click Apply to apply the filters and keep the Creo View Options dialog box open, or click OK to apply the settings and close the dialog box.