To Set Line Style Options
1. Click > .
The Creo Illustrate Options dialog box opens.
2. Next to Showing, select Illustration.
3. On the left, under General, select Line Styles. The General-Line Styles page opens.
4. To add a line style, perform these steps:
a. Click Add. The Line Style: Edit dialog box opens.
b. Type a name and then define the line style.
▪ Solid
▪ Dashed—Set the Line and Gap values. You can also set the Minimum end length.
|
|
If a line has a value greater than 0, the gap following the line must also be greater than 0.
|
▪ Dotted—Set the Spacing. To apply automatic spacing, select Auto.
|
|
If you select Auto, the Spacing option will be disabled.
|
c. Click OK. The new line style is added to the list.
5. To edit a line style, perform these steps:
a. Select the line style from the list and click Edit. The Line Style: Edit dialog box opens.
b. Edit the name or style setting.
▪ Solid
▪ Dashed—Set the Line and Gap values. You can also set the Minimum end length.
▪ Dotted—Set the Spacing. To apply automatic spacing, select Auto.
c. Click OK. The line style is edited.
6. To copy a line style, perform these steps:
a. Select a line style from the list and click Copy. The Line Style: Edit dialog box opens.
b. Type a new name and then change the line style settings as required.
c. Click OK. The line style is copied.
7. To delete a line style, select the line style from the list and click Delete. The line style is removed from the list.
|
|
Line styles that are in use cannot be deleted. Use the Delete Line Style dialog box to choose a replacement line style.
|
8. Click Apply to apply the options and keep dialog box open, or click OK to apply the options and close the dialog box.
