Creo Simulate
>
References
>
Sketcher
>
Dimensioning Sketcher Geometry
>
Working with Dimension Tools
>
Normal Dimensions
>
To Create a Total Included Angle Dimension
To Create a Total Included Angle Dimension
1.
Right-click in the Sketcher window and choose
Dimension
from the shortcut menu or click
Sketch
>
Normal
.
2.
Select the entity to dimension.
The entity must be linear and cannot be parallel to the centerline.
3.
Select the centerline.
4.
Select the entity again and middle-click to place the dimension. The dimension is created.
Normal. Normal. Normal.
The entity must be linear and cannot be parallel to the centerline.