Out-of-the-Box Reports
Creo Schematics comes with standard reports which can be added to the ribbon.
1. Place the cursor over the ribbon, right-click, and choose, Customize the Ribbon.
2. In the Creo Schematics Options dialog box, choose Custom Commands from the Category drop-down list.
3. Click > .
4. Select New Tab (Custom).
5. Right-click and choose Rename.
6. In the Rename dialog, edit the Display name to Reports and click OK.
7. Select New Group (Custom).
8. Right-click and choose Rename.
9. In the Rename dialog, edit the Display name to Connection and click OK.
10. With the Connection (Custom) group selected, from the custom command list, select
Cable From-To Report and click
.
11. Select
Connection From-To-Report and click
.
12. Select
Wire From-To Report and click
.
13. Select
Wire From-To Selected Components Report and click
.
14. Click OK to close the dialog box.
15. In the ribbon, select the Reports tab.
16. Choose the 4 Port Connector connected to the Lamp and Control Module.
17. Click Wire From-To Selected Components Report. Notice the report is only for the preselected connector.
18. Without closing the Report Results dialog box, press CTRL and select a 4 Port Connector attached to the Cable.
19. In the
Report Results dialog click
to generate a report using the current format. The report results updates to include the cable.
20. In the
Report Results dialog box click
to generate a report table using this data.
21. In the
Report Engine – Field Selector dialog box click
to transfer all fields to the
Report Engine dialog box and click
Close.
22. In the
Report Engine – untitled dialog box, click
. The
Report Engine - Style Editor dialog box opens.
23. In the Report Engine – Style Editor dialog box, choose the Table tab, and edit the Name to table.
24. From Border group, click Choose linestyle.
25. In the Report Engine Line Style Editor dialog, click the Color button. The Select a Color dialog box opens.
26. In the Select a Color dialog box, choose a desired color and click OK.
27. Click OK to close the Line Style Editor dialog box.
28. From Grid group, click Choose linestyle.
29. In the Report Engine Line Style Editor dialog box, click the Color button.
30. In the Select a Color dialog box, choose a desired color and click OK.
31. Click OK to close the Line Style Editor dialog box.
32. From the ContentsColor group set the color to a desired color.
33. From the Font drop down list, choose CG Times.
34. Set the Height to be 2.
35. Click OK to close the Report Engine – Style Editor dialog box.