What's New: Creo Parametric 4.0 > Sheetmetal Design > New Pull Wall Tool
New Pull Wall Tool
Use Pull Wall to modify native and imported sheet metal geometry.
User Interface Location: With a sheet metal part open, click Flexible Modeling > Pull Wall.
Release: Creo Parametric 4.0
Benefits and Description
You can watch a video that demonstrates this capability.
Use Creo Flexible Modeling in Sheetmetal Design to pull one or multiple walls in a direction perpendicular to the attachment edge of the wall including what is listed below:
A secondary geometry into the pull
Handle bend and corner reliefs
Edge treatments and corner seams
Cut and form surfaces
Controlling adjacent conditions.
Use Pull Wall to drive dramatic changes to a sheet metal part by pulling walls with the corresponding treatment of neighbor conditions such as corner reliefs, corner seams, bends, and attached geometry. Changes are independent of how the part was created even if it was imported from another CAD system.