To Save, Reuse, and Retrieve a Welding Preference
To Save a Welding Preference
After you have set up a welding preference, save it for reuse as follows:
1. Click
Applications >
Welding. The
Welding tab opens.
2. Click
Preferences. The
Weld Preferences dialog box opens.
3. Set preferences for fillet, groove (ANSI only), butt (ISO only), plug, slot, spot, or general welds.
4. Click Save. The Export File dialog box opens.
5. Type a name for the preference in the File Name box.
6. Click Export.
| You can configure the following options to set the location and name of the weld preferences for each weld type: Weld Type | Configuration File | Fillet | weld_fillet_preferences_file | Groove or Butt | weld_groove_preferences_file | Plug or Slot | weld_plug_slot_preferences_file | Spot | weld_spot_preferences_file | General | weld_general_preferences_file |
|
To Retrieve a Welding Preference
To retrieve a saved welding preference, perform the following procedure:
1. Click
Applications >
Welding. The
Welding tab opens.
2. Click
Preferences. The
Weld Preferences dialog box opens.
3. Click Open. The Import File dialog box opens.
4. Select a file from the list and click Import.