Creo Tutorials > Creo Parametric Tutorials > Beginners Tutorials > Exercise 4 – Performing Motion Analysis > Motion Analysis
  
Motion Analysis
Creo retains a model in the temporary memory until the model is erased, or until the application is closed.
1. With no model open, on the Home tab, click Erase Not Displayed in the Data group. The Erase Not Displayed dialog box opens.
2. Click OK.
3. In Creo Parametric, set the working directory to <downloaded files location> > Exercise 4.
4. On the Home tab, click Open. The File Open dialog box opens.
5. Select crankshaft_assembly.asm and click Open.
6. On the in-graphics toolbar, click Datum Display Filters and clear the (Select All) check box to clear all the datum display check boxes.
7. On the Applications tab, click Mechanism. The Mechanism tab opens.
8. Click Servo Motors from the Insert group. The Servo Motor Definition tab opens.
9. In the graphics window, select Connection_3.first_rot_axis as shown in the following figure.
10. In the Profile Details, do the following:
a. Under Driven Quantity, click the arrow next to Position and click Velocity.
b. Under Coefficients, change the velocity value to 45.
c. Click .
11. On the Mechanism tab, click Mechanism Analysis from the Analysis group. The Analysis Definition dialog box opens.
a. Under Name, type motion.
b. Under Type, select Kinematic.
c. Under Graphical display, change the End Time from 10 to 12.
d. Click Run and observe the model.
e. When the kinematic analysis is complete, click OK.
12. On the Mechanism tab, click Measures from the Analysis group. The Measure Results dialog box opens.
13. Under Measures, click . The Measure Definition dialog box opens.
a. Under Name, type V_1.
b. Under Type, select Velocity.
c. Click and select the connection as shown in the following figure:
d. Click OK. The Measure Definition dialog box closes.
14. In the Measure Results dialog box, under Measures, click . The Measure Definition dialog box opens.
a. Under Name, type V_2.
b. Under Type, select Velocity.
c. Click and select the connection as shown in the following figure:
d. Click OK. The Measure Definition dialog box closes.
15. In the Measure Results dialog box, under Measures, click . The Measure Definition dialog box opens.
a. Under Name, type V_3.
b. Under Type, select Velocity.
c. Click and select the connection as shown in the following figure:
d. Click OK. The Measure Definition dialog box closes.
16. In the Measure Results dialog box, under Result set, click motion.
17. Hold down the CTRL key, and under Measures select V_1, V_2, and V_3.
18. Click Graph. The motion analysis results appear in the Graphtool dialog box.
19. Move the Graphtool window to the bottom left of the screen.
20. Close the Measure Results dialog box.
21. On the Mechanism tab, click Playback from the Analysis group. The Playbacks dialog box opens.
a. Click Play. The Animate dialog box opens.
b. Click Play. The animation plays in the graphics window.
c. Click Stop to stop the animation.
d. In the Animation dialog box, click Close.
e. In the Playbacks dialog box, click Close.
22. Close the Graphtool window.
23. On the Mechanism tab, click Close. The Save Playbacks dialog box opens.
24. Click Don't save.
Congratulations! You have completed this exercise.
On the Quick Access toolbar, click Save and then Close in each active window.