To Create Curve Connections Using Draft Tangent
1. Click
Style >
Curve Edit. The
Curve Edit tab opens.
2. Select a curve, and then select its endpoint. The tangent vector is displayed.
3. Perform one of the following operations:
◦ Right-click the tangent vector and select Draft Tangent.
◦ Click the Tangent tab. Under Constraints, select Draft Tangent from the First box.
4. Select a reference plane or a surface.
|  For a draft to plane, the endpoint of the curve should be a soft point to any other curve. For a draft to surface, the endpoint of the curve must be a soft point onto the surface boundary or a COS. |
5. To change the draft angle, perform one of the following operations:
◦ Double-click the draft value in the graphics window and type a new value.
◦ Click the Tangent tab. Under Properties, type a new value in the Draft box.
6. Click
.