Creo Simulate > Creo Simulate Results Window > Results for Native Mode > Viewing Results > Capping and Cutting Surfaces > To Modify a Cutting Surface
  
To Modify a Cutting Surface
Use this procedure to modify an intersecting cut through your model.
1. Click View > Edit. Depending on how many cutting surfaces you created for the result window, Creo Simulate performs one of these actions:
If you created only one cutting surface, the Results Surface Definition dialog box opens.
If you created multiple cutting surfaces, Creo Simulate instructs you to select a cutting surface. Once you select a surface, the Results Surface Definition dialog box opens.
2. To redefine the surface definition method, select a method from the Define By drop-down list.
3. If you changed your surface definition method to Three Points, use the selector arrow to select three points.
4. If you changed your surface definition method to UCS, use the selector arrow to select the desired coordinate system.
5. If you want to redefine the reference plane orientation, select XY, YZ, or ZX, as appropriate.
6. If you want to change the cutting surface depth, use one of the following methods:
Manually change the depth by entering a new value in the Depth field.
Dynamically change the depth by clicking Dynamic and dragging the mouse to increase or decrease the depth. Click the middle mouse button when you are finished repositioning the cutting surface.
Creo Simulate updates the Depth value on the Results Surface Definition dialog box to reflect your change.
7. Click OK to close the dialog box.
Return to To Create a Cutting Surface.