Sheetmetal > Setting Up Sheetmetal Design > Bends > To Change Bend Settings
  
To Change Bend Settings
1. Click File > Prepare > Model Properties. The Model Properties dialog box opens.
2. Under Sheetmetal, click change in the Bends line. The Sheetmetal Preferences dialog box opens.
3. Click Bend.
4. To specify a different value for the bend radius, type a new value in the box, or select a value from the list:
Thickness—Uses a default radius equal to the thickness of the sheet metal wall.
2.0 * Thickness—Uses a default radius equal to twice the thickness of the sheet metal wall.
0.5 * Thickness—Uses a default radius equal to half the thickness of the sheet metal wall.
5. Set the bend dimension location:
Inside—Dimensions the radius from the inside surface of the bend.
Outside—Dimensions the radius from the outside surface of the bend.
6. To specify a different bend angle, type a new value in the box or select a value from the list.
7. To preview the model with the new settings, click Apply.
8. To regenerate the model with the new settings, click OK.
9. Click OK. The model regenerates using the new settings.