Piping > Routing > To Set the Display of Routing Environment Information
  
To Set the Display of Routing Environment Information
Spec-Driven Piping
1. In an active piping assembly, click Create Pipe or Route Pipe to enter the route pipe environment.
2. To set the information to display follow the steps below:
a. Click Environment. The Piping Environment dialog box opens.
b. Choose a Line Shape from the list if required.
c. Choose a Corner Type from the list.
d. When the Corner Type is Bend, choose a Bend Radius from the list.
e. Click OK.
3. To set the information displayed in the graphics window follow the steps below:
a. Click Setup > Environment. The Piping Environment dialog box opens.
b. Select the Display options.
c. Click OK.
 
* When you begin routing a pipeline, the routing information appears in the lower-left of the graphics window.
Non Spec-Driven Piping
1. In an active piping assembly, click Setup > Environment. The Piping Environment dialog box opens.
2. Choose one or more of the following display options:
Active pipeline—Displays the name of the active pipeline.
Corner Type—Displays the defined corner type: Bend, Fitting, or Miter.
Line Shape—Displays the line shape: Free length flex, Set length flex, or Straight.
3. Click OK.
 
* When you begin routing a pipeline the routing information appears in the lower-left of the graphics window.