To Route a Pipeline from an Equipment Nozzle
1. You must be in Assembly mode, to assemble a nozzle into an assembly. Click
Close on the
Piping tab to return to Assembly mode.
2. Assemble the nozzle in the piping assembly.
3. Right-click the nozzle port in the Model Tree and choose Rename from the shortcut menu.
4. Assign a name to the port of the nozzle, which will be used as the name of the nozzle and press ENTER.
5. Click
Applications >
Piping >
Piping Info. The
Report Pipeline dialog box opens.
6. If a pipeline starts or ends at a nozzle, the nozzle name appears as the From or To for the pipeline in the pipeline report. Generate this information, using the Report Pipeline dialog box. This name appears in the Information Window.
If the assembly where the nozzle is assembled has a name and a FITTING_CODE parameter with the value of EQUIPMENT assigned to it, then its name is used as the equipment name. Output for the From or To is "Equipment_Name – Nozzle_Name". For example, E7A-N2 means Heater Exchange E7A and Nozzle N2.
|  You have to assign a FITTING_CODE parameter with the value of EQUIPMENT to an equipment part in order to designate the part as an equipment. |