Piping > Routing > Routing in Non Spec-Driven Piping Mode > Routing with Follow > To Route a Pipe by Following an Axis/Cylinder
  
To Route a Pipe by Following an Axis/Cylinder
1. Click Follow > Follow Axis. The Follow Axis dialog box opens.
2. Select an axis or cylinder to follow.
3. Set the start First End Offset and end Second End Offset point along the axis to define the length of the axis to follow.
Choose a From option to define the length for the end of the axis or the selected offset reference:
On End—The point is located on the end of the axis.
Offset End—Offset the pipe follow from the end of the axis by the value entered in the Offset box. You can drag the handle in the graphics window as well.
Offset Reference—The offset is from the selected planar surface or csys axis.
4. Click .