To Change and Update Bend Machine Parameters
You can change bend machine parameters in a specification and update the current model with the changes.
1. Locate the Bend Machine Master Catalog (MCAT) file for the selected pipeline or line stock. The default path for these files is <Creo load directory>/text/piping_data/master_catalog/bend_machine/.
2. Use a text editor and change the bend parameter value for the selected pipeline or line stock. Save all changes.
3. Update the model. Click Setup > Update Model. The Update Model dialog box opens.
4. Under
Select Assembly, click
and select the assembly to which you want to apply the changes.
5. Under Model Information, select the Bend m/c Parameters check box.
6. Click OK. The Confirm Cancel dialog box opens. Click Yes to confirm the update. The dialog boxes close and Spec-Driven Piping updates the active assembly information. Spec-Driven Piping confirms the update in the Message Area.
7. Click
to apply the changes to the piping model displayed in the graphics window.