Piping > Drawings > Isometric Drawing Generation (ISOGEN) > Bolt Information in PCF Files
  
Bolt Information in PCF Files
When you export piping information to a PCF file, the bolt and nut information is also exported by default:
• BOLT is the ISOGEN name for the bolt component.
• A bolt is an ERECTION-ITEM.
• In the PCF file, the bolt component appears below the key fitting as shown in the following example of a valve with bolts:
VALVE
END-PIONT
0.0000
-270.7450
0.0000
10.0000
END-POINT
0.0000
-893.0420
0.0000
10.0000
SKEY
VGFL
ITEM-CODE
VVGA3150FLCR24
SPINDLE-DIRECTION
UP
UNIQUE-COMPONENT-IDENTIFIER BECA7606-5DB6-42B7-A976-FEDFF50AE99C
CATEGORY
ERECTION
BOLT
CO-ORDS
0.0000
-893.0420
0.0000
BOLT-DIA
xxx.xx or *
BOLT-ITEM-CODE
MCSS
BOLT-QUANTITY
12
BOLT-LENGTH
xxx.xxx or *
ERECTION-ITEM
MATERIALS
ITEM-CODE MCSS
DESCRIPTION
xxxxxxxxxxxx
 
• CO-ORDS—Downstream END-POINT of the key fitting
• BOLT-DIA—Asterisk (*) if there is no parameter value for the bulk item
• BOLT-ITEM-CODE—MCSS parameter for the bulk item
• BOLT-QUANTITY—QUANTITY parameter for the bulk item
• BOLT-LENGTH—Asterisk (*) if there is no parameter value for the bulk item
• DESCRIPTION—MATERIAL_DESC parameter of the bulk item