About Design Rules Checking
You can enable or disable the design rule check during the pipe modeling process. When you enable the design rule check, the location of violations can be displayed and you can rectify them at an early stage. The modeling process then proceeds with greater accuracy.
Use the design rule checking functionality to:
• Select the design rules to check whenever violations can occur due to a specific pipe modeling operation. You can select all design rules or only a few design rules.
• Indicate the location of a design rule violation.
|
|
 To enable the checking of design rules for piping assemblies that are created using versions of Pro/ENGINEER earlier than Wildfire, set appropriate values to the piping_wildfire_convert configuration option. |