Part Modeling > Datum Features > Datum Points > General Datum Points > To Create a Sketched Datum Point
To Create a Sketched Datum Point
Using a geometry point in Sketcher conveys feature-level information outside of Sketcher. The new datum point exists as a regular datum point in other modules of the application.
1. Click Model > Sketch. The Sketch dialog box opens.
2. Select a sketching plane and set its orientation, or accept the default orientation.
3. Click Sketch. The Sketch tab opens.
4. Click Sketch > Point in the Datum group.
5. Click the graphics window to place the point.
You can create multiple geometry points in the same sketch.
Right-click a point in Sketcher to toggle between Construction and Geometry.
6. Click OK.