To Select Edges Using a Datum Reference and the Graphics Window
1. Click
Model, click the arrow next to
Round, and click
Auto Round. The
Auto Round tab opens.
2. Click the Scope tab. By default, all Solid Geometry is rounded. To exclude geometry, you must also use the Exclude tab.
3. Click Exclude. The Excluded Edges collector is activated.
4. Click
Auto Round >
Datum >
Reference. The
Auto Round tab is paused and the
Datum Reference dialog box opens. A Reference feature appears in the Model Tree.
5. In the graphics window, select the edges you want to exclude from the round. The chains appear in the Datum Reference dialog box in the Chains collector.
6. After you select all the edges to exclude, click OK in the Datum Reference dialog box.
7. Click
on the
Auto Round tab to resume the Auto Round feature. The model appears with the selected edges highlighted. The Reference feature is added to the
Excluded Edges collector.
8. Click
to create the Auto Round with the excluded edges. The Auto Round feature appears in the Model Tree.