Part Modeling > Engineering Features > Round > Transitions > To Define a Round Transition
To Define a Round Transition
This topic is a Master Procedure in that some transitions require that you follow an additional topic to complete the procedure. If you select one of these transitions, follow the instructions.
1. Select the references for the round and click Model > Round. The Round tab opens.
2. Click , or right-click and choose Show transitions to switch to Transition mode. Previews of the transitions are displayed.
3. In the graphics window, select the transition to define.
4. Select a transition type from the box or from the shortcut menu. The transition is previewed.
5. To fill gaps between transitions and part geometry for the Blend, Continue, Intersect, Round Only 1, or Round Only 2 options, select the Capped check box. The transition is defined.